Clean Leak Detection, Clean Profits
Need custom spare parts? Let’s Get in touch.
Thank you for your submission!
Stand Alone Spare Parts
Screw for gas spring on lid
Bolt to mount the gas spring to the lid.
- Length: 3.2cm
- Depth/Diameter: 1.2cm
- Weight: 0.02kg
air, filter
Ring-white
Spacer for mounting the gas spring to the Lid.
- Length: 1cm
- Width: 4cm
- Depth/Diameter: 0.5cm
- Weight: 0.01kg
air, filter
Ring-red
O-ring to close off vacuum ports and pressure sensor ports between the lower flanges on the machine.
- Length: 0.9cm
- Width: 2cm
- Weight: 0.01kg
air, filter
Ring-black
Spacer for mounting the gas spring to the Lid.
- Length: 1cm
- Width: 6cm
- Depth/Diameter: 0.5cm
- Weight: 0.01kg
air, filter
O-ring SLT XXXL
Seal in the lid to close of the measuring chamber once the lid is closed.
- Length: 87cm
- Width: 106.7cm
- Depth/Diameter: 0.6cm
- Weight: 0.23kg
air, filter
O-ring SLT
Seal in the lid to close of the measuring chamber once the lid is closed.
- Length: 56.4cm
- Width: 41.5cm
- Depth/Diameter: 0.3cm
- Weight: 0.06kg
air, filter
Membrane XXXL
SLT XXXL Membrane.
- Length: 91.9cm
- Width: 111.8cm
- Depth/Diameter: 1cm
- Weight: 0.96kg
air, filter
Membrane SLT
SLT Membrane.
- Length: 47.1cm
- Width: 61.3cm
- Depth/Diameter: 1cm
- Weight: 0.03kg
air, filter
Mac Valve XXXL
Valve that closes off the measuring chamber once the end pressure has been reached.
- Length: 11cm
- Width: 4.2cm
- Depth/Diameter: 1.8cm
air, filter
Mac Valve SLT
Valve that closes off the measuring chamber once the end pressure has been reached.
- Length: 8.1cm
- Width: 8cm
- Depth/Diameter: 2.8cm
- Weight: 0.16kg
air, filter
M6 x 20
Bolt to mount the lower membrane on a SLT XXXL.
- Length: 2cm
- Depth/Diameter: 0.6cm
air, filter
M6 x 18 for flange
Bolt to mount the membrane For SLT and For lid SLT XXXL.
- Length: 1.8cm
- Depth/Diameter: 0.6cm
air, filter
M5 x 10 RVS
Bolt to attach the housing of the machine to the upper part of the machine.
- Length: 10cm
- Depth/Diameter: 0.5cm
- Weight: 0.02kg
air, filter
M5 x 10
Bolt to attach the housing of the machine to the upper part of the machine.
- Length: 10cm
- Depth/Diameter: 0.5cm
air, filter
Hinge Lock
To attached the lid to the lower hinge of the machine.
- Length: 8.35cm
- Width: 0.9cm
- Weight: 0.1kg
air, filter
Gas spring
Gas spring to hold up the lid when opened.
- Length: 31cm
- Width: 15cm
- Weight: 0.14kg
air, filter
Gas spring
Gas spring to hold up the lid when opened.
- Length: 37.5cm
- Width: 15.24cm
- Weight: 0.15kg
air, filter
Gas spring
Gas spring to hold up the lid when opened.
- Length: 58.5cm
- Width: 18cm
- Weight: 0.34kg
air, filter
Gas spring
Gas spring to hold up the lid when opened.
- Length: 48.2cm
- Width: 18cm
- Weight: 0.30kg
air, filter
Calibrated pressure sensor
Pressure sensor to measure the pressure inside the measuring chamber.
- Length: 6.7cm
- Width: 2.2cm
- Weight: 0.12kg
air, filter
Air filter
Attaches to the mac valve to filter the air sucked from the measuring chamber.
- Length: 6.5cm
- Width: 2.1cm
- Weight: 0.02kg
air, filter